Reference Hardware

We have tested FMP with various hardware brands to ensure maximum quality assurance.

Flixsys Media Appliance for FlixNet

Xiaomi Mi-R3D hardware is recommended to use with Flixsys Media Appliance software.

We have tested this Mi-R3D Smart router model with our FMS-1WL model and achieved great results. The transmission throughput achieved on the 5.0Ghz band is 1Gbps and 250Mbps on the 2.4Ghz band. Multiple units can be installed to increase the signal coverage area.
 

  • IPQ8064 dual-core 1.4GHz main processor, dual-core 733MHz network coprocessor

  • Hard disk storage: 3.5 inch (1TB / 64MB cache or 8TB / 256MB cache) / SATA 3.0 interface

  • 802.11a / b / g / n / ac WiFi standard

  • Simultaneous dual band 2.4GHz and 5.0GHz networks

  • Four external antennas for faster wireless performance at greater distances

  • Supports external hard drives which you can add  - 256M SLC and flash ROM

Flixsys Media Server for ISP Deployment

Dell PowerEdge R330 is recommended to use with FMS software for larger deployments with 5,000+ concurrent sessions. 

  • Intel Xeon E3-1220 v6 3.0GHz, 8M cache, 4C/4T, turbo (72W)

  • 8GB (1x8GB) 2400MT/s DDR4 ECC UDIMM

  • 8TB 7.2K RPM SATA 6Gbps 3.5in Hot-plug Hard Drive

  • Up to 2 x 350W hot plug redundant power supplies

  • RAID Controllers: PERC S130, PERC H330, PERC H730, PERC H830

  • 1U Rack mount 

  • 2 x 10Gbps NIC

  • Quite operation

  • Record up to 8,000 hours of HD video

Each server can provide 10,000 concurrent HD sessions, more servers can be linked together to provider larger load capacity.

FMP Head-end modules - Offsite Deployments

Amazon EC2 T3.large instance is recommended for all FMP head-end modules for deployments with under 10,000 users. More specific specs will be recommended during the system scoping exercise

  • Burstable CPU governed by CPU Credits and consistent baseline performance

  • Unlimited mode by default to ensure performance during peak periods and standard mode option for a predictable monthly cost

  • AWS Nitro System and high frequency Intel Xeon Scalable processors result in up to a 30% price performance improvement over T2 instances

  • Scalable SSD storage

  • Scalable Computing Resources

FMP Head-end Modules - Onsite Deployments

Dell PowerEdge R330 is recommended to host FCC or FAG modules for onsite deployments. A typical setup is recommended with 2 servers to ensure sufficient redundancy.

  • Intel Xeon E3-1220 v6 3.0GHz, 8M cache, 4C/4T, turbo (72W)

  • 8GB (1x8GB) 2400MT/s DDR4 ECC UDIMM

  • 8TB 7.2K RPM SATA 6Gbps 3.5in Hot-plug Hard Drive

  • Up to 2 x 350W hot plug redundant power supplies

  • RAID Controllers: PERC S130, PERC H330, PERC H730, PERC H830

  • 1U Rack mount 

  • 2 x 10Gbps NIC

  • 5,000 concurrent sessions

  • Record up to 8,000 hours of HD video

Head Office: 500 3A-9 Floor 12, Kaiser Centre, No.18 Centre Street, Sai Ying Pun, Hong Kong

Tel: +1.888.628.2555 | Email: sales@flixsys.com

©2018 by Flixsys Limited | All Rights Reserved.